Re: Data I/O 29A with Unipak Questions About Promlink

From: Mike Coates <mike_at_the-coates.com>
Date: Fri Sep 15 2006 - 14:06:24 EDT

have you selected the right programmer type from the menu - it must
match the plug in pack as well as the 29A bit.

for my 29A, I told it that it was a 29B anyway

Mark Hooks wrote:
> I think I finally have my interface cable working between my PC and my
> 29A unit. I am using Promlink 6.10 to interface between my PC and the
> 29A. However, when I try to set the device I cant. I'm trying to read a
> 2708 and none of the menu options show it, even though the 29A device
> list says it should be there. For that matter nothing but PROM part
> numbers seem to be showing up. How do I fix this? Do I have an outdated
> data file in my promlink directory?
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Fri Sep 15 14:07:59 2006

This archive was generated by hypermail 2.1.8 : Sat Sep 16 2006 - 13:50:00 EDT