> Anybody ? - I presume its worth a try, and I've not tried out
> my pod yet....
>
> However, I've just snagged an Abi Boardmaster so I'm going to
> have a go with that first !!
Wish I knew-- I'd give you an answer, but I'm actually curious myself now!
IIRC, you actually have to give a short instruction sequence to the 63C09 to
switch it to 'enhanced' mode, so I would suspect that it'd work fine for all
the basic tests from a cold start. Once you RUN it may or may not act
differently though. I don't know if the 9000 series pods rely on clock
cycle counting, if so, that might be an issue since the clocks required in
enhanced mode are shorter...
-Clay
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Thu Aug 25 13:43:02 2011
This archive was generated by hypermail 2.1.8 : Sun Aug 28 2011 - 07:50:00 EDT