Re: Can you use a 63C09E CPU in a Fluke 68099000Apod ?

From: Colin Davies <colin.w.davies_at_btopenworld.com>
Date: Sun Aug 28 2011 - 07:34:54 EDT

Thanks Guys,

I certainly think its worth a try, however I've found the fault that was
stopping the CPU running, and it passes the Ram / Rom self test now. Just
some other issues to deal with like sprite rams and no sound. (This is
Contra / Gryzor)

Yes, 63C09E 'powers up' in 6809E Mode and its pin for pin compatable afaik,
so this would be interesting to try out.

I'm a little stuck for space at the moment and there is not much room on the
test bench, I'm hopefully going to be set up in a nice workshop before the
new year, and will have quite a bit of space to have everything accessable
(Back Bedrooms / Spare rooms are quite small in the UK) , so once I have
that sorted, I'll be playing catch up with all the stuff that needs repairs
and getting to grips with lots of tech tools.

Cheers, Col

----- Original Message -----
From: "Clay Cowgill" <c.cowgill@comcast.net>
To: "'Technical Tools Mail List'" <techtoolslist@flippers.com>
Sent: Thursday, August 25, 2011 6:42 PM
Subject: Re: [Techtoolslist] Can you use a 63C09E CPU in a Fluke
68099000Apod ?

>> Anybody ? - I presume its worth a try, and I've not tried out
>> my pod yet....
>>
>> However, I've just snagged an Abi Boardmaster so I'm going to
>> have a go with that first !!
>
> Wish I knew-- I'd give you an answer, but I'm actually curious myself now!
>
> IIRC, you actually have to give a short instruction sequence to the 63C09
> to
> switch it to 'enhanced' mode, so I would suspect that it'd work fine for
> all
> the basic tests from a cold start. Once you RUN it may or may not act
> differently though. I don't know if the 9000 series pods rely on clock
> cycle counting, if so, that might be an issue since the clocks required in
> enhanced mode are shorter...
>
> -Clay
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Sun Aug 28 07:41:11 2011

This archive was generated by hypermail 2.1.8 : Sun Aug 28 2011 - 10:50:01 EDT