Re: 6502 pod error code

I have had some luck re-soldering all the pins on the inter-board
connectors - no experience with this particular pod/problem though

Art
----- Original Message -----
From: "Andre Huijts" <a.huijts@upcmail.nl>
To: "Technical Tools Mail List" <techtoolslist@flippers.com>
Sent: Sunday, November 18, 2012 4:13 PM
Subject: [Techtoolslist] 6502 pod error code

OK....

Something I noticed when checking once again my 6502 pod is that the
interconnecting pins between the two boards seemed very loose on one side
(the more near the lowest part of the pod).

I tried to connect them as tight as possible but the spacer near where the
ground connection of the flat-cable is placed prevents it to fit really
tight. I have a feeling there is still not a good/reliable connection
between the boards this way.

When I connect it now and run the self-test I get this error:

Add line AB12 pin 22 not drivable

Neither the original pod manual nor the additional Pod info for the 9100
indicate this error code and what it means. It is clear enough I guess but
what do they mean with AB12 ?

André Huijts
andre.huijts@upcmail.nl

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Sun Nov 18 16:23:16 2012