Hi !
This is the 3rd time I have RAM problems with my Fluke 9010a.
Always the same behavior. After a couple hours of working, turned the
system off and when turn-on again, show garbage on the display.
The first and second time, I've decide to troubleshoot what IC was
damage, and replaced with new ones.
Now I've decide to change all 8 RAM ICs with NOS ones.
The weird is that my system is not used very often.
Do you guys experienced some similar problems ?
Thanks,
JL
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Mon Mar 18 13:35:50 2013
This archive was generated by hypermail 2.1.8 : Mon Mar 18 2013 - 14:50:00 EDT