On 03/18/2013 10:35 AM, Jose Luiz Martins wrote:
> Hi !
>
> This is the 3rd time I have RAM problems with my Fluke 9010a.
>
> Always the same behavior. After a couple hours of working, turned the
> system off and when turn-on again, show garbage on the display.
>
> The first and second time, I've decide to troubleshoot what IC was
> damage, and replaced with new ones.
>
> Now I've decide to change all 8 RAM ICs with NOS ones.
>
> The weird is that my system is not used very often.
>
> Do you guys experienced some similar problems ?
>
>
> Thanks,
>
> JL
>
Usually only see results like that when there is either a line voltage
drop or power supply issues...
John :-#)#
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Mon Mar 18 14:32:31 2013
This archive was generated by hypermail 2.1.8 : Thu Mar 21 2013 - 11:50:00 EDT