On Wed, 17 Dec 1997, Zonn wrote:
> For 12 bit resolution were going to need a 12 bit DAC that can be fully updated
> at about 6mhz. So assuming no register addressing overhead, that many of the
> DACs require, the serial data must be clocked at 72mhz. Any internal addressing
> needed to operate the DAC will increase this value. Good luck!
>
Yup, 128 * 48 kHz is only 6.14 MHz, so that rules out all lof
Crystal's Audio parts.
Joe
Received on Wed Dec 17 15:38:48 1997
This archive was generated by hypermail 2.1.8 : Thu Jul 31 2003 - 23:01:05 EDT