RE: VG 6100 19VLup22

He means replace the socket on the WG xy neckboard with the socket from
the K4600, so it will fit on the new tube. I've done this with a G07
socket.

-jeff

-----Original Message-----
From: Mark Jenison [mailto:jenison@cig.mot.com]
Sent: Tuesday, September 15, 1998 9:14 AM
To: vectorlist@mcfeeley.cc.utexas.edu
Subject: Re: VG 6100 19VLup22

On Sep 14, 6:10pm, Dangerwil@aol.com wrote:
> Subject: Re: VG 6100 19VLup22
> Well,
>
> I have had great success using the tube from a Wells Gardner K4600
(the
one
> with the stand up boards). It is virtually the same tube as the
Ampliphone.
> It converges easily with the xy hardware. Just mark the magnet ring's
> position very carefully with a permanent marker, then reuse it with
the
vector
> yoke. The easiest way to get around the different tube socket is to
replace
> the xy one with the one off the neckboard of the k4600.

What do you mean by "replace the socket", and why is this necessary?

----------------------------------------------------------------------
Mark Jenison E-mail address: jenison@cig.mot.com
Cellular Infrastructure Group Motorola--Arlington Heights, IL
----------------------------------------------------------------------
Received on Tue Sep 15 11:00:02 1998