RE: New Vector Monitor Project: LM3886

Well, if that's the only time there's likely a problem, we could always just
clamp the inputs to not go too far past the visible edge of the screen...

-Clay

> ----------
> From: Rodger Boots[SMTP:rlboots@cedar-rapids.net]
> Reply To: vectorlist@lists.cc.utexas.edu
> Sent: Friday, November 05, 1999 11:42 AM
> To: vectorlist@lists.cc.utexas.edu
> Subject: Re: New Vector Monitor Project: LM3886
>
> Make sure you measure power usage when it's do the Tempest logo and at the
> end
> of the round when it zooms the maze clear past the edge of the screen.
> The rest
> of the time there probably wouldn't be a problem.
>
>
> James Nelson wrote:
>
> > Rodger, you're not raining on a parade at all, and don't stop
> criticizing
> > designs, otherwise I won't get something that works.
> >
> > The specs on the LM3886 looked ok to me, but maybe it's time for me to
> do
> > some actual current and voltage waveform measurements on Tempest to see
> if
> > it's too demanding for the use of such a device or not. I don't think
> that
> > we are running over 50 watts of power through the yoke.
> >
> > I'll let you know what I come up with on those measurements!
> >
> > Thanks,
> > James
>
Received on Fri Nov 5 14:01:57 1999