The speaker is connected directly to the sound card with no POT in
between. - shouldn't be smoking that stuff anyway. -ha, just kidding.
Matt
_____________________________________________________________________
On Tue, 30 Nov 1999, Simon Whittam wrote:
> What about the sound POT? 10Kohm (I assume)?
>
> SPW
>
> > -----Original Message-----
> > From: Matt Rossiter - Verio Southern California [SMTP:matt@rossiters.com]
> > Sent: Tuesday, November 30, 1999 2:24 PM
> > To: vectorlist@lists.cc.utexas.edu
> > Subject: Troubleshooting Cinematronics Sound Cards
> >
> > I have a bunch of Star Castle sound cards that I'd like to get working
> > right. I'm using a Kurz Kasch test fixture to do it. Basically, it
> > supplies +/- 25v and +5v to the sound card and also has a ribbon connector
> > which goes to J2. With the test fixture you can push certain buttons to
> > produce certain sounds like fire, thrust, etc. I guess it just inverts
> > whatever signals turn on or off the various sounds.
> >
> > I have an 8 ohm speaker hooked to the board, but what I can't figure out
> > is - I can't get any sound to come out. I do hear a hum, and I verified
> > that the speaker is connected to the right pins. The J2 ribbon connector
> > seems to be on right.
> >
> > Has any one ever used the Kurz Kasch test fixture (309AC) to fix
> > Cinematroncs sound cards?
> >
> > thanks...
> >
> >
> > Matt
> >
> >
> >
> > V E R I O
> > Orange County . Los Angeles . San Diego
> > _____________________________________________________________________
> >
> > Matthew J. Rossiter email: mrossiter@verio.net
> > Customer Services Engineer http://socal.verio.net
> > 8001 Irvine Center Drive Phone: 800.273.5600
> > Suite 1200 Phone: 949.450.8400
> > Irvine, CA 92618-2934 Fax: 949.450.8410
> > 24 hour Tech Support: 888.306.4638
> > _____________________________________________________________________
> >
> >
>
Received on Tue Nov 30 13:49:26 1999
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:32:31 EDT