Re: Asteroids Deluxe 12.096MHz xtal

Oh, and no... a second AD that I was going to fix for my brother came with
just the tube and an Electrohome chassis... I have a deflection board but no
HV cage.

Thanks again,
  Josh

----- Original Message -----
From: Jon Raiford <raiford@mindspring.com>
To: <vectorlist@synthcom.com>
Sent: Thursday, January 13, 2000 11:12 AM
Subject: Re: VECTOR: Asteroids Deluxe 12.096MHz xtal

> Hmm.. I wonder if these were pulled to put on Major Havocs. Which other
vectors
> used that 12.096?
>
> Josh: As far as your missing ones go, it will probably work fine with the
12.000, but
> someone found the 12.096's available on the net a couple months ago.
Check the
> vectorlist archives.
>
> Do you have a non-working g05 HV cage? Why not just fix the one you have?
They
> are pretty simple.
>
> Jon
>
> At 10:51 AM 01/13/2000 -0500, you wrote:
> >Hi all again,
> >
> >My Asteroids Deluxe is working perfectly now but I have two spare boards
I'd
> >like to repair. Neither came up when I plugged them into the machine so
I
> >began investigating. First thing I noticed, both spares had their
crystals
> >(Y1) removed. This is supposed to be a 12.096 MHZ crystal but I can't
find
> >any of these locally. Looking at the schematics, the counter simply
divides
> >the crystal's frequency into the desired 6MHz shouldn't a 12.000 MHz
clock
> >produce basically the same clock rate? (I ask because I can get a
12.000MHz
> >crystal right away as opposed to ordering one.)
> >
> >Also, does anyone have a good Electrohome HV cage for the B&W 19" Vector
> >monitor that they'd like to sell?
> >
> >Thanks for any help,
> > Josh
> >
>
>---------------------------------------------------------------------------
> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> >** message body to vectorlist-request@synthcom.com. Please direct other
> >** questions, comments, or problems to neil@synthcom.com.
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Jan 13 08:55:11 2000