Re: What do I need for an Electrohome G05

Chris is correct. The original GO5 used this board. The later models 802/805
used the same Deflection board as the WG 19V2000.

Dan

On Fri, 14 Jan 2000 22:03:24 -0500, you wrote:

>I believe that the regulator board was used only in the G05-801 model. The
>G05-802 didn't have this.
>
>-Chris
>
>-----Original Message-----
>From: Josh Wirth
>To: vectorlist@synthcom.com
>Sent: 1/14/00 8:51 PM
>Subject: VECTOR: What do I need for an Electrohome G05
>
>Really, all I have is a chassis, tube, the chassis transistors, and a
>deflection board. What else do I need? HV cage for sure. Is a G05
>monitor
>regulator board necessary? (I ask because I see one on eBay advertised
>as
>such.) Any help would be greatly appreciated.
>
>Josh
>
>------------------------------------------------------------------------
>---
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
>the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Fri Jan 14 23:58:53 2000