Re: Battlezone & Red Baron Centering Bellows

Steven,

Here's the link to the page

    http://www.enteract.com/~twisnion/bellows.htm

I replaced the bellows in my BZ and they work great. They are a bit stiffer
than the original ones.

/harry

>From: Steven Winslow <winslow@earthlink.net>
>Reply-To: vectorlist@synthcom.com
>To: vectorlist@synthcom.com
>Subject: VECTOR: Battlezone & Red Baron Centering Bellows
>Date: Mon, 19 Jun 2000 16:54:33 -0700
>
>Hello Everyone !
>
>Just noticed this e-mail referring to "TOM" and his bellows. I didn't know
>that anyone had reproduced them. Would they also work in my Red Baron ??
>I believe they are the same but not positive. My Red Baron stick is a
>loose-goose and could really use a new one. Where can I find TOM to order
>'em ??
>
>Thanks for all the great info.
>
>Steven Winslow
>
>
>At 03:45 PM 6/19/00 -0400, you wrote:
> >So did I scare anyone? This list is pretty quiet right now, so I figured
>I'd throw my most recent problem your way..
> >
> >I have a Battlezone caberet that I mostly brought back to life yesterday.
>It seems that the x axis is too large for the screen and won't resize down
>enough to fit. I realize that there are two different resistor sets for
>the 13" versus the 19" monitors, but the ones for the 13" are installed. I
>suppose the problem could be in the logic board (tl082 maybe?), but others
>have told me they suspect the deflection board.. Anyone want to make an
>educated guess?
> >
> >I also have a short on my left controller, but I should be able to track
>that down. I guess its probably time to order the bellows from Tom. Fwiw,
>I've heard that if you drill holes in Tom's bellows, you can bring the
>tension down to the original levels.
> >
> >Jon
> >
> >---------------------------------------------------------------------------
> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
>the
> >** message body to vectorlist-request@synthcom.com. Please direct other
> >** questions, comments, or problems to neil@synthcom.com.
> >
> >
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Jun 19 20:11:12 2000