Re: Tempest board problems

From: Walt <wfeeger_at_amengtest.com>
Date: Mon Feb 26 2001 - 17:28:45 EST

Brian:

Somebody told me it might be the 2114 rams or support chips- so I'm going to
do some checking on those to see if there is anything odd going on there.

----- Original Message -----
From: Brian Deuel <atari@pathwaynet.com>
To: <vectorlist@synthcom.com>
Sent: Monday, February 26, 2001 2:44 PM
Subject: RE: VECTOR: Tempest board problems

> I have a very similar problem as Walt. Here's a pic of the output of MY
> board:
>
> http://coinop.vintagegaming.com/misc/tempest.jpg
>
> This is the gameplay demo in attract mode. I started it up in self-test
but
> it only trips the spot killer. No beeps are to be heard either. I replaced
> all of the socketed chips with known good ones and I still get this
picture.
>
> Any suggestions? The DACs are good, as are the ALU chips.
>
> Brian
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Feb 26 17:51:56 2001

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:31:02 EDT