Re: BattleZone WG monitor shrunk, pulsing picture

From: Kurt Mahan <kmahan_at_xmission.com>
Date: Fri Mar 09 2001 - 23:39:02 EST

Check to see if you've got both + and - voltages.. That happened to me
once.. Just one of the power transistors..

Kurt

> The picture on the WG 19V2000 in my BattleZone is shrunk to the upper right
> corner of the screen (looking straight down at the tube from the front)
> Putting a steady test mode image on it, the image is pulsing -- shrinking
> to a jumble of vectors, and growing out to a box maybe 4 inches square.
>
> The picture looks fine in my scope, so I know it's the monitor.
>
> Any suggestions of where to start looking would be greatly appreciated !
>
> -Chris
>
> ==========================================================
> Chris Candreva -- chris@westnet.com -- (914) 967-7816
> WestNet Internet Services of Westchester
> http://www.westnet.com/
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Fri Mar 9 23:44:05 2001

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:32:02 EDT