Re: MH Proto Whirly Gig

From: Dan <dansmsn_at_msn.com>
Date: Mon May 14 2001 - 01:21:22 EDT

Ah, cr*p, well, I mean cool! But now I need to find another worthy project
to put all of my new gear to work on, any thoughts out there? What piece of
hardware would you like to see reproduced?

Nice looking controllers Mark, how long did it take you to get to this
point?

Thanks,
-Dan

----- Original Message -----
From: "Mark E Davidson" <Burbs1@concentric.net>
To: <vectorlist@synthcom.com>
Sent: Sunday, May 13, 2001 8:52 PM
Subject: Re: VECTOR: MH Proto Whirly Gig

> Yea... I do have the pictures up. and I was working on these again.... I
have 6
> done, a new bunch of encoder boards for all the ones I made and enough for
run
> #2 The link is
>
> http://www.basementarcade.com/arcade/sd/mh/
>
> -=Mark=--
>
> Dan wrote:
>
> > I'm more interested in reproducing the black plastic housing that holds
the
> > rollers, not the rollers themselves. The housing have become brittle
with
> > time and I know that many are cracked and/or damaged just from folks
taking
> > them apart to clean or replace the bearings.
> >
> > Although, if there is a need, it would be pretty straight forward to
> > reproduce the rollers once I get my next project (a CNC lathe) up and
> > running.
> >
> > -Dan
> >
> > ----- Original Message -----
> > From: "Tom McClintock" <tomm@mgcap.com>
> > To: <vectorlist@synthcom.com>
> > Sent: Saturday, May 12, 2001 7:10 AM
> > Subject: Re: VECTOR: MH Proto Whirly Gig
> >
> > > Dan:
> > >
> > > Mark Davidson has already machined up a number of the MH rollers.
Mark -
> > still
> > > have those pictures up?
> > >
> >
>
> --------------------------------------------------------------------------
-
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon May 14 01:33:59 2001

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:32:18 EDT