Re: Removing CP Overlays

Actually,

Sticker Shock is one of those magical things I completely and
unconditionally endorse for all game collectors.

It removes sticker goo WITHOUT hurting paint or marring plexi or plastic.

Everyone should have a can.

----- Original Message -----
From: "someotherguy" <someotherguy@mediaone.net>
To: <vectorlist@synthcom.com>
Sent: Wednesday, May 23, 2001 3:53 PM
Subject: Re: VECTOR: Removing CP Overlays

> I just got through reading the other suggestions, like WD40, Sticker
Shock,
> etc. and by far the most interesting one sounds like the Sticker Shock.
I'll
> have to try that stuff next.
>
> In the past, I've used Aircraft Remover (that's the actual name, carried
at
> many auto parts stores) on metal control panels - assuming there's usually
some
> slight rust anyway, and the thing will need to be sanded and painted.
Aircraft
> Remover is serious paint remover, the eat-a-hole-through-your-skin type.
>
> Richard
>
>
> Anders Knudsen wrote:
>
> > I'm about to remove an old control panel overlay off my Ast Dlx.
> >
> > So...what does everyone use to get the old sticky goop off?
> >
> > I was thinking acetone or maybe turpentine.
> > But, before I get started I wanted to know what others have used.
> > Successes? Failures?
> > Let me know.
> >
> > TIA,
> > -Anders.
> >
>
> --------------------------------------------------------------------------
-
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Wed May 23 18:14:38 2001