Re: Major Havoc/Tempest spinner problems

From: peter jones <highwayman2000_at_mail.ru>
Date: Mon Jun 25 2001 - 03:47:47 EDT

-----Original Message-----
From: jerry madsen <jetskimod@yahoo.com>
To: vectorlist@synthcom.com
Date: Sun, 24 Jun 2001 16:55:14 -0700 (PDT)
Subject: VECTOR: Major Havoc/Tempest spinner problems

>
> Hello,
> I recently got a hold of a Major Havoc board to
> use in my Tempest game,I have the MH to tempest
> conversion board also,everything works accept the
> spinner(video,sound,buttons,coin mechs,all work)I know
> my spinner works because my tempest works fine,my
> conversion board is good also.A while back I plugged a
> different MH board in before i got this one and it did
> the same thing,everything worked accept the
> spinner.Give me some ideas.
> Jerry.
>
meter the voltage on the spinner pcb. make sure it's getting 5v and ground.

if thats o.k. then meter the quadrature outputs between the spinner pcb and the gameboard.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Jun 25 04:07:02 2001

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:31:48 EDT