Re: Electrohome/Sega G08 (G08-003)

Any luck finding any old crappy deflection boards for that chip ???
a cracked/broken pcb that still has that chip populated on it would do
the trick...

What did you find, anything ?

Thanks,

  -- Curt
  
>X-Sender: a1a96636@mail.telus.net
>Date: Sun, 19 May 2002 16:23:12 -0700
>To: vectorlist@synthcom.com, vectorlist@synthcom.com
>From: John Robertson <pinball@telus.net>
>Subject: Re: VECTOR: Electrohome/Sega G08 (G08-003)
>Mime-Version: 1.0
>
>Um, yes, I have a lot of spare parts for these monitors....I'll have to
>check on Tuesday if I have a board that is rough enough that I am willing
>to swipe the IC. Have you checked the number against the ECG catalog to see
>if it might have a "real" part number? They often use off the shelf and
>house number the suckers...
>
>John :-#)#
>
>At 04:56 PM 19/05/2002 -0400, Curtis H. Wilbar Jr. wrote:
>
>
>>Well, didn't really get much tips from people regarding my
>>G08 problem, however, I now know that even if there are other
>>problems, they are temporarily not worth chasing...
>>
>>IC600 has bit the dust.... I deslodered it and moved it into a
>>deflection board (untested) that had proper voltage measurements
>>at IC600... and with the suspect chip in that board it had bad
>>voltages as well....
>>
>>So, anyone got any spare deflection boards, or even better
>>IC600 (Electrohome 14-2156-01 (on chip), 14-002156-01 (from
>>docs), sega p/n 315-00117) ???
>>
>>(I'm sure I know the answer, but I might as well ask)
>>
>>Thanks,
>>
>> -- Curt
>>
>>
>>---------------------------------------------------------------------------
>>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>>** message body to vectorlist-request@synthcom.com. Please direct other
>>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Sun Jun 9 18:57:08 2002