Re: Fluke 9100A Software needed

I have a working machine, but I am in Canada. Dave is in the UK if I'm not
mistaken...

John :-#)#

At 01:01 PM 30/08/2001, you wrote:

>Technically, it is possible to copy the disks. There
>is a disk copy function in the 9100 software. The
>only catch is... unless you have a working system
>already running, you are going to have to use the
>disks to get the machine running in the first place
>and then the whole "marking the disks specifically for
>the machine" deal kicks in. Dave, know anybody with a
>working system that can dupe them for you before you
>use them?
>
>-Chris
>
>
>
>--- John Robertson <jrr@flippers.com> wrote:
> > Can you ask your friend in Holland if these can be
> > duplicated for other
> > 9100 owners? I have a working unit that I have never
> > tried to figure out,
> > but it would be nice to have backup setup discs.
> >
> > If permitted, could you make disc images for
> > distribution to the owners of
> > 9100's?
> >
> > John :-#)#
> >
> > At 02:42 AM 30/08/2001, you wrote:
> >
> > >Hi again ...
> > >
> > >A very nice man at Fluke in Holland just phoned me
> > and agreed to send me
> > >the 2 system disks and the 3 firmware disks for
> > free !
> > >
> > >:o)
> > >
> > >
> > >Dave Langley
> > >www.robotron-2084.co.uk
> > >
> >
> >---------------------------------------------------------------------------
> > >** To UNSUBSCRIBE from vectorlist, send a message
> > with "UNSUBSCRIBE" in the
> > >** message body to vectorlist-request@synthcom.com.
> > Please direct other
> > >** questions, comments, or problems to
> > neil@synthcom.com.
> > >
> > >
> >
>
>
>__________________________________________________
>Do You Yahoo!?
>Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
>http://im.yahoo.com
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Aug 30 13:46:24 2001