Re: tempest coin door lights

Sounds like a replacement light mechanism socket or a different coin door
was placed on or maybe you got a fluke!!!

I agree Rad Shack has the screw in base blubs, but do not stock 47's so you
lucked out. 47's can still be had EASILY (think pinball supplies), I will
tell you that the 5V bulb will burn out quicker and burn brighter if the
supply voltage is 6.3 volts.

my .02 -- BTW my Space Duel from the same era uses 47's in the coin door.

----- Original Message -----
From: "Matthew Sell" <msell@ontimesupport.com>
To: <vectorlist@synthcom.com>
Sent: Thursday, August 30, 2001 9:02 PM
Subject: Re: VECTOR: tempest coin door lights

>
> Radio Shack should have 6V replacements that would work fine.
>
>
> - Matt
>
>
>
> At 07:36 PM 8/30/01 -0400, you wrote:
>
> >I need some help identifying the bulbs on my Tempest coin door. The
> >manual says they should be #47 bayonet bulbs. My bulbs are the screw in
> >type. The sockets are also non bayonet sockets. The bulb says 5V on
> >it. It appears as if they came this way from the factory. Any ideas
> >anyone?
> >
> >Thanks,
> >
> >Bryan Kruzynski
> >
>
>---------------------------------------------------------------------------
> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> >** message body to vectorlist-request@synthcom.com. Please direct other
> >** questions, comments, or problems to neil@synthcom.com.
>
>
>
> Matthew Sell
> Programmer
> On Time Support, Inc.
> www.ontimesupport.com
> (281) 296-6066
>
> Join the Metrology Software discussion group METLIST!
> http://www.ontimesupport.com/cgi-bin/mojo/mojo.cgi
>
>
> "One World, One Web, One Program" - Microsoft Promotional Ad
> "Ein Volk, Ein Reich, Ein Fuhrer" - Adolf Hitler
>
> Many thanks for this tagline to a fellow RGVAC'er...
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Aug 30 23:05:35 2001