> I've been looking at my Star Wars 25" Amplifone HV again.
Interesting, where exactly (dare I ask) are you located?
> I'm getting -31v instead of -24v at the 7924. If I remove the 50ohn 5w
> resistor the regulator now produces -24v perfectly (though off load).
The resistor is shunting the regulator. Hence with no load, expect to see
roughly the same voltage on either side of it. If you really want to test it,
load the regulator output with another resistor.
> I'm getting a 60v? rounded square wave at the collector of the MPSU07
> AT the base of the BU406D I'm only getting a 4v rounded square wave IS THIS
> CORRECT?
I've already mailed off the unit I recently fixed, but I seem to recall seeing roughly the same thing.
Keep in mind the base of that trani is coming off the secondary of a step down xformer,
so it's going to be significantly lower in voltage (remember the trani is a current device).
Rodger, care to add the minutia?
-Mark
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Thu Aug 22 19:59:32 2002
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:33:38 EDT