There are auctions for a control panel and wiring harness on ebay right now,
too.
-Douglas
on 9/26/01 11:25 AM, Tek at mypearl@dds.nl wrote:
> Hi guys,
>
> Finally, after a two year search I found my holy grail, a Star Wars UR
> cabinet!!! Even here in the Netherlands, where they have never been sold in
> those days!
>
> It is basically an empty cabinet taken apart (!) but all the sides and front
> art look near mint...
> It will be a nice job to put this baby back together and find the parts I
> still need (most of te hardware I have found earlier).
>
> If someone has one or more of the following for sale, I would be eternally
> greatfull:
>
> - Anything amplifone (there's a deflection board rite now on ebay I will bid
> on)
> - WG HV cage and deflection board (then I can built a WG6100 to go in in
> stead of the Amplifone)
> - Metal cage and RFI board for the Main CPU + AVG + Audio sandwitch
> - Control panel (Some bastard drilled holes and removed the Yoke) or just a
> Flight Control or Plain panel without it,
> - A marquee or just the wooden piece behind the glass / TL fixture (I love
> original, no Wall Mart replacement TL fixtures in my cab if possible :) )
> - The black *paper* bezel that goes directly around the CRT
>
> I am willing to trade, I have a Star Wars ESB converted board, complete and
> clean but dead (it is not a fairly simple repair, it's some TTL logic or RAM
> on the bus and on the Audio board as well. It does just enough to go into
> RAM test mode and beep, needs new RAM's. I just did not have had the
> opportunity to replace all RAM's the problem sometimes moves, and sometimes
> does not move with the individual RAM chips)
>
> Besides the ESB board I have a complete, working Tempest board in extremely
> clean condition, it has the 32K ROMS as well.
>
> Lastly I have a Tempest Wiring Harness for trade...
>
> LMK if you can help me out by selling or trading for any of the above
> mentioned parts!
>
> Thanks for reading through,
>
> Mendel
>
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Wed Sep 26 10:52:20 2001
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:33:42 EDT