Re: Has anyone used a 19VATP22 in an Amplifone monitor??

From: Joe Bachmann <joe.bachmann_at_newmail.net>
Date: Wed Feb 13 2002 - 00:47:21 EST

Does the 19VATP22 have the same pinouts?

You may need a neck connector from where you pulled it..

JB

MKDUD@aol.com wrote:

> Hello,
>
> I'm running into a bit of trouble using a 19VATP22 tube for an Amplifone
> monitor, and wondered if anyone could help. The physical size of the neck
> seems to be about 3/16 too wide (in diameter) for the Amplifone yoke (from
> Rauland M48AAW00X) to fit on, and the pins for the neck connector seem to be
> about 1/4" further out in diameter than on the Rauland tube. Has anyone used
> a 19VATP22 for Amplifone replacment? I can't see how you would get the yoke
> to go on, and the pin diameter really has me baffled. Please help if you can.
>
> Thank You,
> Michael Kelley
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue Feb 12 21:38:36 2002

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:33:52 EDT