MKDUD@aol.com wrote:
>
> In a message dated 3/5/2002 10:32:56 PM Eastern Standard Time, MKDUD@aol.com
> writes:
>
> << <A HREF="http://www.members.aol.com/mkdud/cinemon/levelint.jpg">
> http://www.members.aol.com/mkdud/cinemon/levelint.jpg</A> >>
>
> Sorry! This above URL is the correct one for the pic of the Cinemat boards
> from my previous post. I was reading Mark's G08 faq (great job, BTW!) and
> left his URL in the hyperlink by mistake.
>
> While I'm on the Cinematronics monitors, has anyone ever set up inline fuses
> to the deflection transistors (I was thinking 2.5amp SB) to protect the
> display board components should the deflection transistors go?
Careful there. If you add fuses they should be in series with the
yoke. Anything that partially disconnects the output transistors from
the drivers will cause driver damage (like unplugging the output
transistors).
> Thanks, and please excuse my idiocy today,
> Michael Kelley
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue Mar 5 23:15:26 2002
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:33:55 EDT
