Re: 25" Amplifone Brightness Problem

O
>> Yeah, Michael said the 9 o'clock reference was a typo. It should be
>> 11:00 o'clock as you noted. It's corrected in the latest draft of his
>> FAQ I can tell you that :)
>>
>> How big a hole *should* be drilled in the HV board if 3/8" is too big?
>>

Well according to the Customer Drawing from Wintron the new HV. Supply
is held in place with a 6-32 MTG. Stud. I know that is right since that
is the info I used to but the nut that Wintron does not supply with the
unit.

I wish I could remember exactly what size drill bit I used. But what I
did was find the next biggest drill bit I had larger than the hole. That
one made a perfect hole for the mounting stud. If I had drilled to 3/8"
like the FAQ said the mounting nut would have pulled right through. :-)
The hole for the wires however needed to be larger then the mounting
hole in order to get them all through. Sliding them through one at a time
I was able to get 4 out of the 6 through the hole when drilled to the
same size as the mounting stud hole. I used the next biggest drill bit
from that size and the 6 wires just fit through all at the same time. I
can see people just drilling this one out larger since it wouldn't hurt.

Thanks for the confirmation on my assumption of 9 o'clock really being
11 o'clock. Does anyone know the location of the most up to date FAQ?
Did Mike ever get a chance to put together a Deflection Board FAQ like he
mentions in the HV FAQ? Or is there a good Deflection FAQ out there
anyone knows of?

Greg
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Mar 7 08:58:43 2002