"Gregory S . Erway" wrote:
>
> 7) The FAQ I used mentions the pin positions and specifically mentions
> putting green to 9 o'clock. There is not a pad at 9 o'clock and I
> assumed 11 o'clock based on the previous line in the FAQ.
> 8) The other FAQ problem I saw was that it mentions drilling out the
> mounting hole (slightly larger) to 3/8". That is WAY TOO BIG. Luckily
> I used my brain and didn't drill it out that bid. But thought I should
> note the error.
Yeah, Michael said the 9 o'clock reference was a typo. It should be
11:00 o'clock as you noted. It's corrected in the latest draft of his
FAQ I can tell you that :)
How big a hole *should* be drilled in the HV board if 3/8" is too big?
tm
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Mar 7 08:09:22 2002
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:33:55 EDT