Re: Star Wars control panel overlay

I cross-referenced one from Berg a while back. Here's a
couple clips from old emails:

>> Sure, no problem. Looks like the gear is a 24 pitch,
>> 14 tooth gear with a .250 inch bore and .250 inch face.
>>
>> I'm pretty sure I found the part in a Berg Manufacturing
>> catalog. If so, the part number is P24A66-14.

> I got the gear from Berg last week and got it installed. It
> is a perfect replacement and works great!!!! Thanks again for
> all of your help. May the Force Be With You!

Crud... this is the small gear, isn't it?

Tim

----- Original Message -----
From: "Christopher X. Candreva" <chris@westnet.com>
To: <vectorlist@synthcom.com>
Sent: Wednesday, March 13, 2002 1:34 PM
Subject: RE: VECTOR: Star Wars control panel overlay

> On Wed, 13 Mar 2002, Bret Pehrson wrote:
>
> > I've been casually looking into having these gears reproduced.
>
> Are they really custom gears ? No chance they are available as a standard
> part from someplace like http://www.smallparts.com/ or
> http://www.nordex.com/
>
> ==========================================================
> Chris Candreva -- chris@westnet.com -- (914) 967-7816
> WestNet Internet Services of Westchester
> http://www.westnet.com/
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Wed Mar 13 13:03:15 2002