Re: FS: 2901's and other needed ics (rams/proms/etc.)

Mark

Do you know the spped on the 5101's?

Thanks,

Scott

big dog wrote:

> Hi,
>
> I still have quite a few 2901's left for sale, the turnout was not
> that great on these. I would like to correctly call them what they
> are this time, thanks to Rodger Boots for all his help. These are
> military grade ceramic 2901's, four bit bit slice chips. Four of
> these together handle 16 bits of data on the Tempest pcbs, they are
> the chips that sit next to the POKEYS on the smaller of the 2 pcbs,
> they are also used on I-Robot and Im sure other vector pcbs. I think
> the price im selling these for as well as the other chips is a great
> deal. These are NOS still in their factory tubes, everyone who has
> bought them so far has been quite impressed. I also have some other
> chips for sale as well, below is the pricing for the Vectorlist only.
> All chips below are NOS/unused/brand new:) If you have some other
> chips for trade let me know, there are a few chips I could use for
> some projects.....but cash works the best. I can take Paypal to this
> address or you can send a MO to the below address, just let me know.
>
> 2901.....$1each/min order 10.........100 or more .75each shipping
> will vary on these due to their weight, but 10 would be $4 shipping.
>
> AM93425 (2125) rams (may work on some Vectorgames, but Pac and others
> for sure)......we all know what these are, $1.25 each/min order
> 10.......100 or more $1.00 each, shipping is $4 for 100 or less
>
> 5101's (cmos) I have 2 types (SCM5101E and MWS5101EL3), a mix will
> be given. $2 each/min order 5, shipping is $4
>
> 82S09 (ram) $2.25 each/min order 5...........100 or more $2.00,
> shipping is $4 up to 100.
>
> 4116 (ram) I have 3 types (a mix will be given), all types have been
> tested and work fine in my games. .35each/min order 50......$4
> shipping
>
> N82S23N (prom) used on Battlezone and others I believe not to mention
> Pac and Galaga, $1.50 each/min order 10.......100 or more
> $1.25each......shipping is $4 up to 100
>
> ER-2055 (earom.....Atari High Score Save Chip) $2.50 each/min order
> 5.....shipping is $4 up to 100
>
> AM27S191PC (prom) Just make me a fair offer.
>
> 2N3792 (vector monitor transistor) $1.25each/min order 10 $4
> shipping.
>
> 74LS670 (4x4 register file logic........used on Battlezone, Tempest,
> and many many others) .75each/min order 20........... 200 or more .60
> each.
>
> SN74191 ........make an offer.
>
> Shipping will be about the same if you mix and match parts, if you buy
> this and that the shipping is NOT $4+4......instead ill cut that down
> and most likely it will still only be $4. The min order requirements
> only apply if you are buying that min # of that one chip. For
> instance, if you buy a good size order you are welcome to mix and
> match any quanity you want.......and most likely the shipping wont go
> up much at all. Im not out to make a penny on shipping and
> packing.....I consider that my responsibility as a seller. If you see
> something that I posted that seems high or way out of line just let me
> know, but as far as I can tell Im blowing these chips out at a great
> price. All chips will be shipped in static bags and packed well, if
> something goes wrong in shipping I will replace the parts if I still
> have them.......if I don't, I will refund the money. I was able to
> buy out a small parts warehouse in south GA, so now im passing the
> savings along. I do not have an unlimited supply of these, when they
> are gone they are gone.
>
> You are welcome to check my feedback on ebay (username: mhcapps), or
> you can post to RGVAC for a check. Please email me at
> catfishh@bellsouth.net (yes 2 H's in catfish), no need to post here
> to place an order. My Paypal addy is the same as my email, and here
> is my home Money Order info......, if you have dealt with me several
> times in the past a personal check will be fine. I can ship to Canada
> or the UK but the shipping will go up.
>
> Mark Capps
> 1842 Chrysler Dr
> Atlanta, GA 30345
> Phone: 404-634-8076
>
> Just let me know what you need and thanks,
> Mark Capps
>
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Fri Mar 29 05:58:26 2002