RE: Question regarding 19K6100 HV Transformer....

Greg,
^^^^^

 Already have, but will go over it again, to be sure.
Apprecite Your Input and will keep you all posted.

Arcadius....... :-)

-----Original Message-----
From: Gregg Woodcock [mailto:woodcock@sisna.com]
Sent: Wednesday, September 11, 2002 12:28 AM
To: vectorlist@synthcom.com
Subject: Re: VECTOR: Question regarding 19K6100 HV Transformer....

----- Original Message -----
From: "Stempak Arcadius-ASTEMPA1" <ASTEMPA1@motorola.com>
To: <vectorlist@synthcom.com>
Cc: "Stempak Arcadius-ASTEMPA1" <ASTEMPA1@motorola.com>
Sent: Tuesday, September 10, 2002 11:12 PM
Subject: RE: VECTOR: Question regarding 19K6100 HV Transformer....

> Greg,
> *****
>
>
> Well thanks again, for the advice and this is
> where my problem lies, as I forgot to mention
> the obvious, which is, that even though I can
> adjust the HV as previously stated, and the Monitor
> displays a decent clear picture / focus, I can not get
> the B+ Voltage to ever reach 180VDC. In fact the B+ will
> only range around 135 VDC to around 170 VDC, or so.

Check the FAQ under bad/low HV.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Wed Sep 11 14:19:31 2002