hi.
looking more into a universal HV unit, i need some help.
on the 6100 and amplifone the HT is 19.5 KV
but on the G08 it's 22.5 KV - can someone who has a G08 (and knows what they are doing) please wind the voltage down to 19.5 KV and report any problems with the image.
i would like to make a box with only 1 HT voltage, and the G08 and 6100 use the same series of tube so i cant see a problem.
what i have so far is this,
-------------------------
INPUT:
110-120vac
OUTPUTS:
19.5 KV
FOCUS
GRID
180VDC
6.3VAC
----------------------
i am now looking for the right LOPT with a 180v B+ output.
the only problem i really see is with the G08, i cant be bothered fucking around with the X/Y inputs to make a shutdown system.
better to retro-fit a copy of the atari spot-killer circuit to those monitors.
(IMO)
outputs will of course be regulated, and full X-ray protection will be included.
question2
does anybody need anything like this for B/W monitors?
i have never noticed anybody complaining about anything but HV diodes on those units.
L8r.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Fri Sep 27 21:33:27 2002
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:09 EDT