Re: Who fixes Cinematronics boards?

From: Curtis H. Wilbar Jr. <vector_at_hawkmountain.net>
Date: Sun Oct 13 2002 - 22:54:58 EDT

So which chips on Cine boards don't work right with logic comparators ?

This would be usefull knowledge for anyone out there (myself included)
who has a logic comparator.

Thanks,

-- Curt

>From: "Gregg Woodcock" <woodcock@sisna.com>
>To: <vectorlist@synthcom.com>
>Subject: Re: VECTOR: Who fixes Cinematronics boards?
>Date: Sun, 13 Oct 2002 15:47:54 -0500
>MIME-Version: 1.0
>Content-Transfer-Encoding: 7bit
>X-Priority: 3
>X-MSMail-Priority: Normal
>X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
>
>
>----- Original Message -----
>From: "John Robertson" <jrr@flippers.com>
>To: <vectorlist@synthcom.com>
>Sent: Wednesday, October 02, 2002 1:33 AM
>Subject: VECTOR: Who fixes Cinematronics boards?
>
>
>> I'm seeing a few posts on RGVAC about folks needing these repaired. I
>don't
>> have the signature fixture so I'm not attempting to fix them at this time.
>> Anyone know who does fix these turkeys?
>
>I have had significant success by using logic comparators. There are
>several chips which do not register properly with a logic comparator but now
>I know which ones they are and how to read them. I would be willing to
>repair PCBs for people BUT I have a huge backlog (6 -12 months of work) AND
>I need to make enough room in my garage to fit another machine to use as a
>test bed. If that doesn't scare you off, email me with your situation and
>I'll get back to you when I am dug out and ready to take on new repairs...
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Sun Oct 13 19:57:43 2002

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:12 EDT