Re: Who fixes Cinematronics boards?

These are now up on my site if anyone else wants them.

www.ionpool.net

tm

"Fish, David" wrote:

> Paul,
>
> I converted the schematic, layout and cable schematics
> to Adobe pdf files and they're on thier way to you. When
> I originally did the schematics, I didn't have access to the
> fancy software we have today ;-)
>
> Dave
>
> -----Original Message-----
> From: Paul Sommers [mailto:rgvac_macman@froggy.com.au]
> Sent: Monday, October 14, 2002 3:32 PM
> To: vectorlist@synthcom.com
> Subject: Re: VECTOR: Who fixes Cinematronics boards?
>
> Matt,
>
> A scan would be great. I've tried opening the postscript layout files on
> Spies, but I can't find a Mac postscript viewer that doesn't abort with
> an error.
>
> Cheers
> Paul
> On Tuesday, October 15, 2002, at 04:41 AM, Matt Rossiter wrote:
>
> > I use the Kurz Kasch test fixture with a Signature Analyzer. If anyone
> > is
> > interested in having me scan in an image of the exorsizor cards, I'd be
> > happy to do so. I don't think they'd be that hard to reproduce.
> >
> > I've had great success using it. I once fixed a rip-off board in about
> > an
> > hour one time. Other games have taken me a couple days.
> >
> >
> > Matt
> >
> >
> >
> > ----- Original Message -----
> > From: "Paul Sommers" <rgvac_macman@froggy.com.au>
> > To: <vectorlist@synthcom.com>
> > Sent: Monday, October 14, 2002 12:37 AM
> > Subject: Re: VECTOR: Who fixes Cinematronics boards?
> >
> >
> >> I now have a signature Analyzer and I was going to try and build an
> >> Exorcisor with the schematics on Spies. Anyone done this? Any comments?
> >> Doesn't look too hard, but again I'm probably missing something.
> >>
> >> Cheers
> >> MacMan
> >>
> >> On Monday, October 14, 2002, at 06:47 AM, Gregg Woodcock wrote:
> >>
> >>>
> >>> ----- Original Message -----
> >>> From: "John Robertson" <jrr@flippers.com>
> >>> To: <vectorlist@synthcom.com>
> >>> Sent: Wednesday, October 02, 2002 1:33 AM
> >>> Subject: VECTOR: Who fixes Cinematronics boards?
> >>>
> >>>
> >>>> I'm seeing a few posts on RGVAC about folks needing these repaired. I
> >>> don't
> >>>> have the signature fixture so I'm not attempting to fix them at this
> >>>> time.
> >>>> Anyone know who does fix these turkeys?
> >>>
> >>> I have had significant success by using logic comparators. There are
> >>> several chips which do not register properly with a logic comparator
> >>> but now
> >>> I know which ones they are and how to read them. I would be willing
> >>> to
> >>> repair PCBs for people BUT I have a huge backlog (6 -12 months of
> >>> work)
> >>> AND
> >>> I need to make enough room in my garage to fit another machine to use
> >>> as a
> >>> test bed. If that doesn't scare you off, email me with your situation
> >>> and
> >>> I'll get back to you when I am dug out and ready to take on new
> >>> repairs...
> >>>
> >>
> >>
> --------------------------------------------------------------------------
> > -
> >>> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
> >>> in
> >>> the
> >>> ** message body to vectorlist-request@synthcom.com. Please direct
> >>> other
> >>> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
> >>>
> >>
> >>
> --------------------------------------------------------------------------
> > -
> >> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> > the
> >> ** message body to vectorlist-request@synthcom.com. Please direct other
> >> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
> >
> >
> ---------------------------------------------------------------------------
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> > the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to vectorlist-owner@synthcom.com.
> >
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Tue Oct 15 07:51:43 2002