RE: Who fixes Cinematronics boards?

Matt,

 Can you debug Vectorbeam CPU boards with the Kurz Kasch?
With the Cine' Exorcisor there is an extra jumper that must
be added. Unfortunately, I've never found it's complete 'to-from'
description. Do you have to do something similar with a K-K?

Dave

-----Original Message-----
From: Matt Rossiter [mailto:rossiter@ni.net]
Sent: Monday, October 14, 2002 7:21 PM
To: vectorlist@synthcom.com
Subject: Re: VECTOR: Who fixes Cinematronics boards?

I've posted some scans of the Kurz Kasch cards here -->
http://rossiters.com/cinematronics

I apologize for my lack of cropping on the last picture. I also positioned
the capacitors straight up so you could see the traces better, but naturally
it lifted up the card from the scanner a bit, so it'll look a little out of
focus.

If you need more scans or descriptions let me know.

Matt

----- Original Message -----
From: "Paul Sommers" <rgvac_macman@froggy.com.au>
To: <vectorlist@synthcom.com>
Sent: Monday, October 14, 2002 12:32 PM
Subject: Re: VECTOR: Who fixes Cinematronics boards?

> Matt,
>
> A scan would be great. I've tried opening the postscript layout files on
> Spies, but I can't find a Mac postscript viewer that doesn't abort with
> an error.
>
> Cheers
> Paul
> On Tuesday, October 15, 2002, at 04:41 AM, Matt Rossiter wrote:
>
> > I use the Kurz Kasch test fixture with a Signature Analyzer. If anyone
> > is
> > interested in having me scan in an image of the exorsizor cards, I'd be
> > happy to do so. I don't think they'd be that hard to reproduce.
> >
> > I've had great success using it. I once fixed a rip-off board in about
> > an
> > hour one time. Other games have taken me a couple days.
> >
> >
> > Matt
> >
> >
> >
> > ----- Original Message -----
> > From: "Paul Sommers" <rgvac_macman@froggy.com.au>
> > To: <vectorlist@synthcom.com>
> > Sent: Monday, October 14, 2002 12:37 AM
> > Subject: Re: VECTOR: Who fixes Cinematronics boards?
> >
> >
> >> I now have a signature Analyzer and I was going to try and build an
> >> Exorcisor with the schematics on Spies. Anyone done this? Any comments?
> >> Doesn't look too hard, but again I'm probably missing something.
> >>
> >> Cheers
> >> MacMan
> >>
> >> On Monday, October 14, 2002, at 06:47 AM, Gregg Woodcock wrote:
> >>
> >>>
> >>> ----- Original Message -----
> >>> From: "John Robertson" <jrr@flippers.com>
> >>> To: <vectorlist@synthcom.com>
> >>> Sent: Wednesday, October 02, 2002 1:33 AM
> >>> Subject: VECTOR: Who fixes Cinematronics boards?
> >>>
> >>>
> >>>> I'm seeing a few posts on RGVAC about folks needing these repaired. I
> >>> don't
> >>>> have the signature fixture so I'm not attempting to fix them at this
> >>>> time.
> >>>> Anyone know who does fix these turkeys?
> >>>
> >>> I have had significant success by using logic comparators. There are
> >>> several chips which do not register properly with a logic comparator
> >>> but now
> >>> I know which ones they are and how to read them. I would be willing
> >>> to
> >>> repair PCBs for people BUT I have a huge backlog (6 -12 months of
> >>> work)
> >>> AND
> >>> I need to make enough room in my garage to fit another machine to use
> >>> as a
> >>> test bed. If that doesn't scare you off, email me with your situation
> >>> and
> >>> I'll get back to you when I am dug out and ready to take on new
> >>> repairs...
> >>>
> >>
>
>> -------------------------------------------------------------------------
-
> > -
> >>> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
> >>> in
> >>> the
> >>> ** message body to vectorlist-request@synthcom.com. Please direct
> >>> other
> >>> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
> >>>
> >>
>
>> -------------------------------------------------------------------------
-
> > -
> >> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> > the
> >> ** message body to vectorlist-request@synthcom.com. Please direct other
> >> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
> >
>
> --------------------------------------------------------------------------
-
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> > the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to vectorlist-owner@synthcom.com.
> >
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Tue Oct 15 07:27:03 2002