WG 6100 HV help please

From: Bachmann, Joe <Joe.Bachmann_at_citadelgroup.com>
Date: Mon Oct 28 2002 - 10:12:00 EST

I am having trouble with 3 HV units. I can only get 16kv out of them and can
not adjust the HV higher or lower. I believe the issue was caused by a bad
deflection board. I have checked Q900-905 and the resistors mentioned in the
flowchart as well as the 160v 33uf cap. All are good. What am I missing?

One of the units was working until I removed it from a working game and
tested it with the deflection board I was working on. Is it possible that
the deflection board damaged the HV unit somehow, or just a coincidence?

Thanks,
JB
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Mon Oct 28 07:18:18 2002

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:13 EDT