Re: Vector's are hard to fix ? HA!

Sockets are expensive... why do you think most monitors need an iso xfmr?
Cause it's cheaper to build it that way..

Cheers, Don

----- Original Message -----
From: "Christopher X. Candreva" <chris@westnet.com>
To: <vectorlist@synthcom.com>
Sent: Monday, February 10, 2003 3:55 PM
Subject: VECTOR: Vector's are hard to fix ? HA!

>
> Next person who says that is going to get . . .
>
> I'm fixing my first raster monitor -- a G07, and it comes time to check
the
> chasis mounted transistors. Bob Robert's tips page has all this talk
about
> soldering on them, and I'm saying to myself "Why is anyone resoldering on
> the socket. I mean, T03 transistors are socketed, right ?"
>
> Great Mother of Zeus -- they solder wires right on the transistors ! NO
> SOCKETS !!!!
>
> Oh give me my vector monitors with nice clean plugs, sockets, etc, any
day.
>
> -Chris
>
> PS -- anyone who knows why a G07 would be blowing the 1.25 amp fuse when
the
> chasis transistors are NOT shorted to ground, the heater coil isn't
shorted
> to ground, and the flyback isn't cracked, I'm open to suggestions at this
> point.
>
> ==========================================================
> Chris Candreva -- chris@westnet.com -- (914) 967-7816
> WestNet Internet Services of Westchester
> http://www.westnet.com/
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Mon Feb 10 16:02:29 2003