-----Original Message-----
From: "Christopher X. Candreva" <chris@westnet.com>
To: rasterlist@synthcom.com
Date: Tue, 11 Feb 2003 13:31:56 -0500 (EST)
Subject: Re: RASTER: Re: VECTOR: Vector's are hard to fix ? HA!
>
> On Tue, 11 Feb 2003, John Robertson wrote:
>
> > This should be on Rasterlist (rasterlist@synthcom.com)....but I would check
>
> Yes -- I am surprised and thankfull for all the responses, which will keep
> me busy tonight !
>
> Even though the discusion went to the raster repair side, my main thought
> WAS about how much easier I find vector monitors to repair. (Except the G08
> in a Sega color -- that is an abomination!)
>
> This was my first raster repair, and to my mind it puts to rest the whole
> "Vectors are too hard to repair" myth.
>
> Aside from the T03 sockets, I'm surprised at the lack of anything like the
> Greg Woodcock guide (This blows, replace this. That blows, replace that).
>
> Officially off Vectorlist -- any response about where to find such a beast
> lets move to raster only.
>
> ==========================================================
as we are wrapping this thread up i will end it by saying that the reason there is no faq as such is because most raster monitors work the same way and are fixed using the same basic diagnostic tecniques,
tecniques that are second nature to people who repair tv's and monitors on a regular basis.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Tue Feb 11 17:24:04 2003
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:21 EDT