Re: Quad-Bit Slicers

Hi,

I was selling ceramic 2901's on here with overseas shipping avaliable
for $1.00 each in 100 pc lots for a long time. I did not have very many
takers and finally liquidated the stock. I am trying to get some more
now if folks are really interested.

Mark Capps

peter jones wrote:

>-----Original Message-----
>From: MKDUD@aol.com
>To: vectorlist@synthcom.com
>Date: Wed, 12 Feb 2003 10:36:49 EST
>Subject: Re: VECTOR: Quad-Bit Slicers
>
>
>
>>In a message dated 2/11/2003 9:01:38 PM Eastern Standard Time,
>>tony@tonyjones.com writes:
>>
>>
>>
>>
>>>>you can even put one into a battlezone/tempest instead of the 4 original
>>>>
>>>>
>>>chip
>>>
>>>
>>>>s.
>>>>
>>>>
>>>Sorry to be the bearer of bad news but AM2901s (the 40pin branded variant
>>>of these bit slice chips) are $1.50 each from B&G Micro. They've had them
>>>at this price for longer than I can remember.
>>>
>>>
>>>
>>>
>well i heard that they ran out a long time ago.
>
>
>
>> Can one of these go in ANY socket on the BZ/Tempest/RB aux board, and
>>eliminate all 4 of the 137004's?
>>
>>
>>
>you need to make an adapter.
>
>interesting thing to note is that bootleg pitfighter pcbs have an adapter on most of them containing 4 2901s.
>
>anybody who says these chips are only $1.5 again is going to really piss me off, you sure as hell are not going to get one for less than $15 if you live OUTSIDE the u.s.
>that is IF you can even find them without ripping an old pcb apart.
>
>still, on the bright side at least not having george bush running my country i still have rights.
>just found a leaked copy of the upcoming 'PATRIOT ACT II' on the net.
>and people thought the taliban where bad!!!!!!!
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to vectorlist-owner@synthcom.com.
>
>
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Fri Feb 14 06:43:56 2003