Re: WG15V2000 query

Yeah, the 15" and the 19" are both the same - aside from a couple of resistor
changes. There is no 15V2000 manual. All the appropriate notes are in the
19V2000 manual.

tm

Commander Dave wrote:

> Martin,
>
> I am about 90% sure they are the same. If they aren't the same, then it will
> be darn close. I am not sure about the fuse blowing, but I worked on a
> 15V2000 that was blooming and found that the high voltage diode was bad. Be
> sure to use the same type... mine had
> a VARO H1809 in it and I tried using a VARO H1812, but after a warm-up found
> it did not work.
>
> By the way, if you happen to find a manual/schematics on the 15V2000 (not
> the 19V2000) could you possibly scan it for me? I'd like to have a copy,
> even though the 19V2000 can be used for repairs.
>
> Regards,
> -Commander Dave
>
> ----- Original Message -----
> From: "Martin White" <martin@guddler.co.uk>
> To: <vectorlist@synthcom.com>
> Sent: Friday, February 14, 2003 6:12 AM
> Subject: VECTOR: WG15V2000 query
>
> > Apologies to those on UKVAC for the cross-post, but after I clicked send I
> > figured this would be the better place to post :O)
> >
> > Anyway, first up, can anyone confirm from experience if the 19V2000 cap
> kits
> > available from places like arcadeshop have the same parts list as for the
> > 15V2000? I don't much fancy spending even $15, only to get the kit and
> then find
> > I've got to hunt around for a few caps that might be different!
> >
> > The problem I'm trying to cure is that of an NOS 15" WG Asteroids monitor
> that
> > a) 99% of the time blows the 1A fuse when you switch it on, and b) on
> those
> > occasions that it doesn't, the picture will grow to about 4x the screen
> size.
> >
> > I am assuming a cap kit will be a very good place to start as the monitor
> really
> > is brand spanking! I've got a new filter cap for the power brick too.
> >
> > Worth mentioning that I'm not in a position to actually do this yet as the
> > monitor is all boxed up as the cab isn't here at the mo, I just figured I
> ought
> > to start looking at it soon...
> >
> > Cheers,
> > Martin
> >
> >
> > --------------------------------------------------------------------------
> -
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to vectorlist-owner@synthcom.com.
> >
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Fri Feb 14 08:34:59 2003