yeh, i thought the same, but i swapped out the stock motorolas 4016's with
new motorolas of precise same type, no difference, i then swapped in with
toshiba 4016's, again, no difference... the quest continues..
Andy Welburn
www.andys-arcade.com
> Andy -
>
> >i will replace caps on the pcb tomorrow, but for now, anyone seen this
> >before and can pinpoint it right away? :)
>
> I've seen something *very* similar ......... the cause was voltage
> crossover in the analog circuit and was fixed by replacing the two 4016's
> in that section
>
> Of course something else in that area might instead be responsible, but
the
> 4016's are a good starting point
>
> Phil
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Thu Feb 27 16:23:02 2003
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:21 EDT