Re: Connector on HV Focus wire?

Id like to know too as Im working through a pile of monitors myself and
a connector would be sweet. By the way...

The deflection board IS flammable :-( (yea.. Im having one of THOSE
nights)

-=Mark=-

Tom McClintock wrote:

>So I've got this G08 deflection board which had been
>stripped of all it's transistors (and a few other
>bits). Someone had also added an insulated spade
>connector to the HV focus wire.
>
>Since the focus wire is the only soldered wire between
>the HV assembly and the deflection board, a connector
>makes it pretty easy to work on the board. No need for
>constant desoldering of the focus wire.
>
>However, I can't believe this is a good/safe thing to
>do since I can find no connector that is properly rated
>for the voltage in the focus wire. Then again, the
>spade connector on this G08 deflection board is not
>melted.
>
>Any advice or wisdom here?
>
>
>
>tm
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to vectorlist-owner@synthcom.com.
>
>
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Thu Mar 13 20:45:49 2003