dedicated Major Havoc questions

From: Tony Jones <tony_at_tonyjones.com>
Date: Sun Mar 30 2003 - 13:46:25 EST

1) On a dedicated Major Havoc, there is a green ground wire (with a clip
at the end) which comes up into the monitor compartment on the same
wiring loom that goes to the deflection pcb.

Where is this supposed to clip onto, I can't see a mention of where it
goes in the manuals.

If you could e-mail me a JPEG, that would be even better.

2) I noticed in the dedicated Major Havoc manual that there was a metal
HV shield for the HV board, I don't recall seeing similar in the StarWars
manual and my Quantum doesn't have a shield. Interference problems due to
the cabinet design? Is it needed, if so, does anyone have one?

3) The other thing I noticed -- the entire monitor portion of my MH was
empty when I got it, now my tube is from a Quantum and HV/deflection is,
I'm guessing, from a StarWars -- is that the socket assembly had a small
adaptor inserted into it changing the layout. I had to remove it in order
to connect it to the Quantum tube. I'm assuming that all will be well once
I fire it up? I was thinking that perhaps this HV board was from a 25" Star
Wars and it's tube connector is different?

4) I've installed a Wintron, new BU406d, new regulators, fuses between the
HV and deflection board -- but I have no history with the HV/deflection
boards. Is there any testing that is recommended before flicking the
power switch?

Thanks

Tony
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Sun Mar 30 10:40:34 2003

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:24 EDT