Wouldn't this one work?
http://www.arcadeshop.com/pics/atari-upright-black-bezel.jpg
tm
On Mon, 31 Mar 2003, "joemagiera" wrote:
>
> I'm trying to make a home made bezel for a Quantum. I
> would like to match
> an original as best I could. If anyone has easy
access
> to a Quantum with an
> original bezel (the cardboard around the monitor) and
a
> digital camera, can
> you please take a couple of pictures and several
> measurements for me?
>
> The picture I would like, is with the front glass
> removed and game off.
> Take a picture that would include the full bezel to
> just beyond where it
> sits in the cabinet so I can see how it sits on the
> cabinet. Remember,
> please don't jam the list with pictures, please send
> directly to my e-mail
> below (or post the link on the web to them).
>
> There are two sets of measurements I could use. The
> first set is eight
> measurements, two from each inside corner of the
bezel.
> Measure from that
> inside corner point of the bezel to the top of the
> bezel and to the side of
> the bezel. I just want to get the length of the
angled
> piece of cardboard,
> not the flat part (the flat part is the piece that
> would be exactly vertical
> when installed). I hope that makes sense. The second
> set is a measurement
> of each of the four sides of the flat part of the
> bezel. I would like to
> get the measurement (height and width) of each of
those
> 4 flat parts of the
> bezel.
>
> FYI, I suspect that the bezel is symmetrical and that
> measuring one vertial
> and one horizontal for each set of measurements I need
> would be enough.
>
> Thanks much!
>
> Joe
> joemagiera@ameritech.net
>
>
---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com.
> Please direct other
> ** questions, comments, or problems to
> vectorlist-owner@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Mon Mar 31 20:37:42 2003
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:24 EDT
