Re: WG6100 .. green out of focus

Have you tried feeding a different color signal from the game board
into the green signal in the deflection board ? i.e. swap red and
green.... does the focus problem stay with green on the monitor ?

I've never heard of anything like this myself... do you have another
neck board you can try ?

Hopefully someone else here has some other ideas as well.

-- Curt

>X-Originating-IP: [127.0.0.1]
>From: <steve@coule.freeserve.co.uk>
>To: vectorlist@synthcom.com
>Subject: VECTOR: WG6100 .. green out of focus
>Date: Wed, 9 Apr 2003 16:19:19 +0000
>MIME-Version: 1.0
>Content-Transfer-Encoding: 7bit
>
>
>I've got a 6100 that's working nicely apart from one thing ... the focus knob
can be adjusted so that blue and red are in focus but green is way out of focus.
If I focus green, then red and blue are miles out. Even when "focused", green is
barely ok and the star wars green intro writing is still an out of focus mess.
>
>I've basically swapped everything apart from the yoke, all colours are pure ..
green seems to need to be driven harder judging by the pots on the neck board.
>
>I'm assuming the tube is not in the best of health - has anyone seen this
before? Is rejuvenating the tube likely to help? Or will I get more
satisfaction dropping it into a trash compactor hopper?
>
>Any tips?
>
>Steve
>
>
>__________________________________________________________________________
>Join Freeserve http://www.freeserve.com/time/
>
>Winner of the 2003 Internet Service Providers' Association awards for Best
Unmetered ISP and Best Consumer Application.
>
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Wed Apr 9 09:48:59 2003