Re: Battlezone Eproms?

2716's but check the strapping - some boards might be wired for 2708s.

John :-#)#

At 11:10 PM 24/07/2003 -0700, Mark E Davidson wrote:

>Hey Scott,
> You misunderstood me. A friend has a stripped battlezone board that I
> wanted to replace the missing Roms with EPROM's, But I don't know what
> type to use
>
>-=Mark=-
>
>Scott Brasington wrote:
>>
>> >From MAME.. source code
>>
>>Vector/Mathbox roms:
>>
>> ROM_LOAD( "036422.01", 0x3000, 0x0800, 0x7414177b )
>> ROM_LOAD( "036421.01", 0x3800, 0x0800, 0x8ea8f939 )
>>
>>Not sure what chip locations.
>>
>>These are the CPU roms
>>
>> ROM_LOAD( "036414.01", 0x5000, 0x0800, 0xefbc3fa0 )
>> ROM_LOAD( "036413.01", 0x5800, 0x0800, 0x5d9d9111 )
>> ROM_LOAD( "036412.01", 0x6000, 0x0800, 0xab55cbd2 )
>> ROM_LOAD( "036411.01", 0x6800, 0x0800, 0xad281297 )
>> ROM_LOAD( "036410.01", 0x7000, 0x0800, 0x0b7bfaa4 )
>> ROM_LOAD( "036409.01", 0x7800, 0x0800, 0x1e14e919 )
>>
>>
>>
>>----- Original Message -----
>>From: "Mark E Davidson"
>><mailto:mark@basementarcade.com><mark@basementarcade.com>
>>To: <mailto:vectorlist@vectorlist.org><vectorlist@vectorlist.org>
>>Sent: Thursday, July 24, 2003 5:01 PM
>>Subject: VECTOR: Battlezone Eproms?
>>
>>
>>
>>>
>>>what Eproms are used in Battlezone, on the vector generator PCB?
>>>
>>>-=Mark=-
>>>
>>>---------------------------------------------------------------------------
>>>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>>>** message body to
>>><mailto:vectorlist-request@vectorlist.org>vectorlist-request@vectorlist.org.
>>>Please direct other
>>>** questions, comments, or problems to
>>><mailto:chris@westnet.com>chris@westnet.com .
>>>
>>>
>>
>>
>>---------------------------------------------------------------------------
>>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>>** message body to
>><mailto:vectorlist-request@vectorlist.org>vectorlist-request@vectorlist.org.
>>Please direct other
>>** questions, comments, or problems to
>><mailto:chris@westnet.com>chris@westnet.com .
>>
>>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@vectorlist.org. Please direct other
** questions, comments, or problems to chris@westnet.com .
Received on Fri Jul 25 00:25:09 2003