Re: Battlezone Eproms?

Cool! Thats the answer I was looking for :-)

-=Mark=-

John Robertson wrote:

> 2716's but check the strapping - some boards might be wired for 2708s.
>
> John :-#)#
>
> At 11:10 PM 24/07/2003 -0700, Mark E Davidson wrote:
>
>> Hey Scott,
>> You misunderstood me. A friend has a stripped battlezone board that
>> I wanted to replace the missing Roms with EPROM's, But I don't know
>> what type to use
>>
>> -=Mark=-
>>
>> Scott Brasington wrote:
>>
>>>
>>>>From MAME.. source code
>>>
>>>Vector/Mathbox roms:
>>>
>>> ROM_LOAD( "036422.01", 0x3000, 0x0800, 0x7414177b
>>>)
>>> ROM_LOAD( "036421.01", 0x3800, 0x0800, 0x8ea8f939
>>>)
>>>
>>>Not sure what chip locations.
>>>
>>>These are the CPU roms
>>>
>>> ROM_LOAD( "036414.01", 0x5000, 0x0800, 0xefbc3fa0
>>>)
>>> ROM_LOAD( "036413.01", 0x5800, 0x0800, 0x5d9d9111
>>>)
>>> ROM_LOAD( "036412.01", 0x6000, 0x0800, 0xab55cbd2
>>>)
>>> ROM_LOAD( "036411.01", 0x6800, 0x0800, 0xad281297
>>>)
>>> ROM_LOAD( "036410.01", 0x7000, 0x0800, 0x0b7bfaa4
>>>)
>>> ROM_LOAD( "036409.01", 0x7800, 0x0800, 0x1e14e919
>>>)
>>>
>>>
>>>
>>>----- Original Message -----
>>>From: "Mark E Davidson"
>>><mark@basementarcade.com> <mailto:mark@basementarcade.com>
>>>To:
>>><vectorlist@vectorlist.org> <mailto:vectorlist@vectorlist.org>
>>>Sent: Thursday, July 24, 2003 5:01 PM
>>>Subject: VECTOR: Battlezone Eproms?
>>>
>>>
>>>
>>>
>>>
>>>>
>>>>what Eproms are used in Battlezone, on the vector generator PCB?
>>>>
>>>>-=Mark=-
>>>>
>>>>---------------------------------------------------------------------------
>>>>** To UNSUBSCRIBE from vectorlist, send a message with
>>>>"UNSUBSCRIBE" in the
>>>>** message body to
>>>>vectorlist-request@vectorlist.org <mailto:vectorlist-request@vectorlist.org>.
>>>>Please direct other
>>>>** questions, comments, or problems to
>>>>chris@westnet.com <mailto:chris@westnet.com> .
>>>>
>>>>
>>>>
>>>>
>>>
>>>---------------------------------------------------------------------------
>>>** To UNSUBSCRIBE from vectorlist, send a message with
>>>"UNSUBSCRIBE" in the
>>>** message body to
>>>vectorlist-request@vectorlist.org <mailto:vectorlist-request@vectorlist.org>.
>>>Please direct other
>>>** questions, comments, or problems to
>>>chris@westnet.com <mailto:chris@westnet.com> .
>>>
>>>
>>>
>>>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@vectorlist.org. Please direct other
** questions, comments, or problems to chris@westnet.com .
Received on Fri Jul 25 09:07:56 2003