RE: ID this board, anyone?

From: John Robertson <jrr_at_flippers.com>
Date: Fri Jan 23 2004 - 14:03:11 EST

At 08:32 AM 23/01/2004, Sean McLachlan wrote:
> > It looks like a bootleg Asteroids board.
> >
> > Thanks,
> > -Chris
>I don't have an emprom reader/burner for ROMIDENT purposes, but I do have an
>Asteroids cab that I can plug the board into. Were most bootleg boards pin
>compatible with the originals? IIRC, Asteroids has a slot cut in the edge
>connector to keep you from plugging the harness in backwards. If the same
>slot is in the bootleg, I'll get out the Asteroids schematics and see if the
>pinouts look the same, then plug it in and see what happens.

Looks like it is wired to drop into an Asteroids cabinet...but if it blows
up don't blame me! ;-)

John :-#)#

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri Jan 23 14:03:49 2004

This archive was generated by hypermail 2.1.8 : Fri Jan 23 2004 - 15:50:01 EST