Re: Odd G08 behavior after recapping

From: John Robertson <JRR_at_flippers.com>
Date: Sat Feb 21 2004 - 14:04:14 EST

Perhaps you had plugged the fan to the Deguass jack and vice-versa?

John :-#)#

At 11:22 PM -0500 2/20/04, Christopher X. Candreva wrote:
>(That was long enough I thought I would put this in a separate post).
>
>Immediately after I recapped the G08, it wasn't working. The image was
>rotating back and forth about +/- 15 degrees from the X axis. After maybe
>20 seconds, the HV would shut down - picture would bloom and start to dim.
>And, the fan wasn't running.
>
>Come back to it the next day, same behavior.
>I pull the monitor and hook it up on the bench to run some tests -- and it
>works fine -- picture steady, stays on, fan runs. It works back in the cab,
>and is still running now 5 days later. I can't duplicate the failure.
>
>Obviously something is loose -- any ideas what ? I'd like to fix it BEFORE
>it starts doing this again, and possibly damages something else.
>
>
>==========================================================
>Chris Candreva -- chris@westnet.com -- (914) 967-7816
>WestNet Internet Services of Westchester
>http://www.westnet.com/

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Feb 21 14:03:51 2004

This archive was generated by hypermail 2.1.8 : Sun Feb 22 2004 - 01:50:01 EST