Re: Issue with 6100 in self test

I have moved boards back and forth and found the problem follows the
neck board. Any ideas?

Thanks,

Scott

Scott Goings wrote:

> I purchased an Atari 6100 monitor which had been disassembled (boards
> removed, yoke and rings messed with). I have reassembled the monitor and
> placed the yoke and rings in the original location by looking at the
> pattern of dirt and dust on the monitor neck.
>
> The monitor comes up but I am having some problems. It is not close to
> being converged. Anything I do with the yoke does not help convergence
> at all. When I have the game (Space Duel) in the cross hatch test screen
> the screen displays the non converged pattern then it goes blank. Then
> each individual color comes on one after the other and the cycle
> repeats. Moving the monitor to my Tempest machine produces the same
> behavior. In game mode the monitor does not do this.
>
> Any ideas of what is causing the monitor to behave this way in self
> test? The convergence issue may just be me as I have never converged a
> monitor before. At this point I will take on problem at a time.
>
> Thanks,
>
> Scott
>
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun Mar 28 16:32:53 2004