Re: Wells Gardner 6100 Wavyness, Bouncing

The fix for this is to use an original WG6100 harness and not the unboard
connector on the new deflection.

Email me if you have any questions or need more help.

Thanks,

Fred

----- Original Message -----
From: "Anthony Pietrak" <anthony@quarterarcade.com>
To: <vectorlist@vectorlist.org>
Sent: Thursday, June 24, 2004 12:19 PM
Subject: VECTOR: Wells Gardner 6100 Wavyness, Bouncing

>
> Kind of puzzled with this one, it's a Wells 6100 Color X-Y monitor that we
> have running in a Tempest. Picture looks good, but its bouncing a bit
(more
> than the usual flicker) and I've noticed some wavyness, almost like some
> interference.
>
> Monitor has a new HV unit and deflection board from Arcadeshop installed.
> The HV cage is intact, we've tried another Tempest board and had the same
> issue, so we're pretty certain it is the monitor.
>
> I've installed other HV units in different monitors/games from Arcadeshop
> without having this issue. Never installed both the deflection board and
HV
> unit, but we're trying to bulletproof this as best we can.
>
> Any thoughts?
>
> Anthony
>
> --Anthony Pietrak
> www.QuarterArcade.com
> Restored Arcade Games for your Home
>
>
>
>
> --------------------------------------------------------------------------
-
> ** Unsubscribe, subscribe, or view the archives at
http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Jun 24 14:17:20 2004